"

吉利彩票app下载拥有全球最顶尖的原生APP,每天为您提供千场精彩体育赛事,吉利彩票app下载更有真人、彩票、电子老虎机、真人电子竞技游戏等多种娱乐方式选择,吉利彩票app下载让您尽享娱乐、赛事投注等,且无后顾之忧!

"
Hello, welcome to the official website of Wuhan Xinlaifu Hydraulic pneumatic Equipment Co. LTD
Hot keywords:

Rexroth hydraulic pump hydraulic pump station plunger pump hydraulic station system variable plunger pump

 

About us
News

Rexroth A7VO variable pump

Your position: Home page > Product center > Rexroth hydraulic pump > Rexroth A7VO variable pump

Rexroth A7VO variable pump

Rexroth A7VO variable pump

Classification: Rexroth hydraulic pump

Ddetailed information

Rexroth A7VO variable pump

safety instructions
-The A7VO pump is designed for use in open circuits.
-Project planning, installation and commissioning of the axial piston unit must be carried out by qualified personnel.
-Before using the axial piston unit, please read the corresponding instruction manual completely. If necessary, it can be obtained from Bosch Rexroth.
-During and shortly after operation, the axial piston unit (especially the solenoid) may be at risk of causing burns. Appropriate safety measures (such as wearing protective clothing) should be taken.
-The characteristics of the axial piston unit may change due to different working conditions (working pressure, oil temperature).
-Working line oil port:
· The oil port and fixed thread are designed for the maximum specified pressure. The manufacturer of the machine or system must ensure that the safety factors of the connected components and pipelines meet the specified working conditions (pressure, flow, hydraulic oil, temperature).
· Working line oil ports and functional oil ports are only used for hydraulic lines.
-Pressure shut-off valve and pressure controller do not provide overpressure safety protection. An overflow valve will be provided in the hydraulic system.
-The data and instructions contained herein must be followed.
-The product cannot be approved as a component that complies with the general machinery safety concept of ISO 13849.
-Use the following tightening torques:
· Connector:
Refer to the manufacturer's instructions for the tightening torque of the joints used.
· Installation bolts:
For mounting bolts with ISO metric threads that meet DIN 13 standards and threads that meet ASME B1.1 standards, we recommend checking the tightening torque of each box according to VDI 2230.
· The threaded hole of the axial plunger unit:
The maximum allowable tightening torque MG max is the maximum value for internal threaded holes, and must not exceed this value.
· Locking screw:
For the metal locking screw provided with the axial plunger unit, the tightening torque MV required for the locking screw should be used.


 
   
   
   
   

 

Product navigation

Home page  REXROTH  About Us  News Center  Download Center  Product Center  Site Map  XML Map

Wuhan Xinlaifu Hydraulic pneumatic Equipment Co. LTD

Tel: 027-85849187? Fax: 027-85849186? Pgone: 13971340391

Email: wh@rexroth-hyd.com? QQ:2909698088

Address: No. 28-30, Building 7, Hubei Modern Hardware & Electrical City, Dongxihu District, Wuhan

Factory address: Shenghua Industrial Park, Xincheng 12th Road, Dongxihu District, Wuhan

鄂ICP备16006620号6?

鄂公网安备 42010302001238号

You are the 1293790th visitor

吉利彩票app下载